Used Vet Equipment

View Original

2021 Oncology Hood - In Nassau County, New York

Used Oncology Hood

Manufacture year: 2021

Excellent Working Condition

Brand: Across International

Last Used in 2023

Dimensions - 42.8"x30.5"x89" fully assembled

Approx. Weight: 450

Reason for Sale: No longer needed

NSF Certified 3 Ft Class II Type A2 Biosafety Cabinet by Across International

PRACTICALLY BRAND NEW!! Only 900 hours of used time!!

Either local pick-up in NY or buyer is responsible for freight arrangements and pricing

A biosafety cabinet also called a biological safety cabinet or microbiological safety cabinet is an enclosed, ventilated laboratory workspace for safely working with materials contaminated with (or potentially contaminated with) pathogens requiring a defined

The primary purpose of a BSC is to serve as a means to protect the laboratory worker and the surrounding environment from pathogens. All exhaust air is HEPA-filtered as it exits the biosafety cabinet, removing harmful bacteria and viruses. This is in contrast to a laminar flow clean bench, which blows unfiltered exhaust air towards the user and is not safe for work with pathogenic agents. Neither are most BSCs safe for use as fume hoods. Likewise, a fume hood fails to provide the environmental protection that HEPA filtration in a BSC would provide. However, most classes of BSCs have a secondary purpose to maintain the sterility of materials inside (the "product").

Class II cabinets provide both kinds of protection (of the samples and of the environment) since makeup air is also HEPA-filtered. There are five types: Type A1 (formerly A), Type A2 (formerly A/B3), Type B1, Type B2 and Type C1. Each type's requirements are defined by NSF International Standard 49, which in 2002 reclassified A/B3 cabinets (classified under the latter type if connected to an exhaust duct) as Type A2, and added the Type C1 in the 2016 standard. About 90% of all biosafety cabinets installed are Type A2 cabinets.

All specifications:

Model-BC-3F

Electrical requirements- 115V 60Hz 1-Phase 400 watts

Chamber- Dimensions: 35.8 x 23.5 x 26" Material: 304 stainless steel Power outlet with cover: four, < 500 watts Water port x 1, stainless steel Gas port x 1, stainless steel Surface height from ground: 29.5" Hanging bar: stainless steel, with 10 hooks

Lights- LED lights: 10W x 2, > 1000 Lux UV lights: 20W (Germicidal UV lamp, emission 253.7 nanometers)

  • UV lights available only when front glass panel is fully closed.
  • Recommended replacement interval: 600 hours

Air flow- Volume Inflow: 255 CFM (cubic feet per minute) Downflow: 380 CFM Exhaust: 255 CFM Speed Inflow: 100-110 FPM (feet per minute) Downflow: 60-70 FPM Motor: 1/2 HP, 9A

  • 70% recirculated internally, 30% discharged from top vent
  • Air circulation available only when front glass panel is open

Top clearance- 12" (recommended)

HEPA (High-Efficiency Particulate Air) filter

Two, with 99.999% efficiency at 0.3 μm diameter Filter hour indicator and life bar on controller

  • Recommended replacement interval: 4,000 hours

Front safety panel

Material: tempered safety glass (thickness > 5mm), dual-layer, laminated, UV blocking Recommended opening height: 10" Maximum opening height: 20.5"

Material:

Chamber: 304 stainless steel

Main body: powder coated steel

Controller: LCD screen with soft touch buttons and remote control

Noise: < 65 dB(A)

Casters: Four, with stationable feet

Unit weight & dimensions: Unit: 450 Lbs Unit: 42.8 x 30.5 x 89" (fully assembled, WxDxH)

Safety: Abnormal airflow alarm Filter replacement alarm Front glass panel unsafe height

Compliance: NSF/ANSI 49 (C0559576)

$7,000 MAKE OFFER

Shipping is an extra cost - Will need crating transport

In Nassau County, New York

K356EO

See this content in the original post